Nortel 8003AC Installation Manual page 26

26 Metro Ethernet Routing Switch 8600 modules
GBIC order number
AA1419004
AA1419041
AA1419017-9024
Only GBICs that Nortel qualified are supported for use in the 8608GBE
Module. GBICs that Nortel did not qualify can operate within the module,
but were not tested for power draw, electromagnetic interference, and
interoperability.
For more information about the GBICs and instructions for installing them,
see Nortel Installation — SFP, XFP, and GBIC Hardware Components
(NN46225-301).
"8608GBE/8608GBM module LEDs" (page 26)
8608GBE and 8608GBM module LEDs.
8608GBE/8608GBM module LEDs
"8608GBE/8608GBM module LEDs" (page 26)
8608GBM module LEDs.
8608GBE/8608GBM module LEDs
Type
Port
Copyright © 2005-2007, Nortel Networks
.
GBIC type
1000BaseZX
1000BaseT
CWDM wavelengths 1470nm-1610nm
Label Color/State
TX Green/Blinking
Amber/Steady
Off
RX Green/Steady
Green/Blinking
Amber/Steady
Off
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
shows the location of the
describes the 8608GBE and
Meaning
The port is transmitting data.
A fault condition exists on the line or on
the attached remote device.
The port did not detect a fault condition.
The port has a link and is enabled.
The port is receiving data.
The port has either no optical signal or
no link synchronization.
The port has signal but no link.