Nortel 5100 Series Release 2.3.3 User Manual page 90

Nortel Switched Firewall Browser-Based Interface Users Guide
Fields and buttons on the form are as follows:
General
Smart Update Management
Secure Internal Communication is used to establish Secure Internal Communications
(SIC) between the management station and the Firewall.
90 Browser-Based Interface forms reference
Status provides a list with these selections:
o Enabled indicates that Check Point FireWall-1 NGX is processing on the
Firewall.
o Disabled indicates that Check Point FireWall-1 NGX is not processing on the
Firewall.
Update submits the changes to the pending configuration.
Status provides a list with the following two selections:
o Enabled indicates that Check Point SmartUpdate software updating is enabled.
TIP: Disable SmartUpdate management when software update is complete.
o Disabled indicates that Check Point SmartUpdate software updating is disabled.
Update submits the changes to the pending configuration.
List of Hosts lists the Firewall hosts by IP address.
Password provides a field to enter the Check Point SIC password. TIP: This
password differs from the login password.
Password (again) provides a field to reenter and confirm the Check Point SIC
password.
Reset SIC resets SIC for the Firewall.
216383-D October 2005