Nortel Switched Firewall Browser-Based Interface Users Guide
Administration/SNMP/Trap Hosts Add Trap Host form
Use the Administration/SNMP/Trap Hosts Add Trap Host form to add a trap host.
Figure 96 Administration/SNMP/Trap Hosts Add Trap Host form
Fields and buttons on the Administration/SNMP/Trap Hosts Add Trap Host form are as
follows:
IP Address provides an entry field to specify the IP address of the trap host.
Port provides an entry field to specify the port to send the trap. TIP: The SNMP default
port is 162.
Community String v2c provides an entry field to specify the community string for the trap
host.
Trap user (v3) provides an entry field to specify the user employed for trap authentication.
Update submits new SNMP User Name information to the pending configuration.
Back returns to the Administration/SNMP/Trap Hosts form without submitting changes to
the pending configuration.
130
Browser-Based Interface forms reference
216383-D October 2005