Nortel 5100 Series Release 2.3.3 User Manual page 45

Cluster/Logs/ELA form
Use the Cluster/Logs/ELA form to configure Event Logging API (ELA) (see
Cluster/Logs/ELA form).
ELA allows Firewall log messages to be sent to a Check Point SmartCenter Server for display
through the Check Point SmartView Tracker.
Figure 23 Cluster/Logs/ELA form
N
OTE
Certificate for the service to the Firewall to enable ELA logging. For configuration details, see
the Nortel Switched Firewall 2.3.3 User's Guide and Command Reference, (213455-L).
The Cluster/Logs ELA (Check Point ELA Log) form is divided into the following two
sections:
General Settings
Pull SIC Certificate
General Settings displays the following fields:
Status displays a list with two choices:
216383-D October 2005
– Configure an ELA service on the Check Point management station and transfer a SIC
Disabled disables Check Point ELA logging.
Enabled enables Check Point ELA logging.
Nortel Switched Firewall Browser-Based Interface Users Guide
Browser-Based Interface forms reference 45