Nortel 5100 Series Release 2.3.3 User Manual page 67

Network/Routes/OSPF/Redistribute form
Use the Network/Routes/OSPF/Redistribute form to display and modify the OSPF
Redistribution settings (see Network/Routes/OSPF/Redistribute form).
Figure 41 Network/Routes/OSPF/Redistribute form
Fields and buttons on the Network/Routes OSPF/Redistribute form are as follows:
OSPF Redistribution displays the following three settings:
Enabled
Metric is the numeric value used by OSPF for all redistributed routes.
Metric Type is the OSPF exterior metric type for redistributed routes.
RMAP is the OSPF Connected Redistribute RMAP number.
Action provides the following selection:
216383-D October 2005
Nortel Switched Firewall Browser-Based Interface Users Guide
Connected
Static
Default Gateway
Yes indicates that the setting is enabled.
No indicates that the setting is disabled.
Modify provides a form to modify the connected route redistribution (see
Network/Routes/OSPF/Redistribute Modify form on page 68).
Browser-Based Interface forms reference 67