Nortel 5100 Series Release 2.3.3 User Manual page 57

Network/Routes/Proxy ARP form
Use the Network/Routes/Proxy ARP (Address Resolution Protocol) form to view and
configure the Proxy ARP status and addresses that allow the Firewall to respond to Proxy ARP
requests (see Network/Routes/Proxy ARP form).
Figure 32 Network/Routes/Proxy ARP form
The Network/Routes/Proxy ARP form is divided into the following two sections:
General
Proxy ARP Addresses
Fields and buttons on the form are as follows:
General
Proxy ARP Addresses
216383-D October 2005
Nortel Switched Firewall Browser-Based Interface Users Guide
Proxy Status contains a list displaying the following selections:
o Disabled disables Proxy ARP for the cluster.
o Enabled enables Proxy ARP for the cluster.
Update submits the Proxy status change to the pending configuration.
IP Address lists the IP addresses for which the Proxy provides ARPs in the cluster.
VRRP Group lists the VRRP group, if VRRP is set up, for which the Proxy provides
ARPs in the cluster.
Action provides the delete selection used to delete the IP address if at least one Proxy
ARP address is present.
Browser-Based Interface forms reference 57