Debug Forms - Nortel 5100 Series Release 2.3.3 User Manual

Nortel Switched Firewall Browser-Based Interface Users Guide
Click Submit to execute the selected Check Point command.
Result displays the result of the selected command execution.

Debug forms

Diagnostics/Debug/OSPF form
Use the Diagnostics/Debug/OSPF form to configure OSPF debug settings (see
Diagnostics/Debug/OSPF form).
Figure 116 Diagnostics/Debug/OSPF form
Fields and buttons on the Diagnostics/Debug/OSPF form are as follows:
Routing OSPF Debug displays the following OSPF debugging options:
152 Browser-Based Interface forms reference
Unload Check Point Policy (fw unloadlocal)
Current interfaces (ifconfig)
Current running processes (ps -aefH)
Iptables information (iptables -L)
ARP Table Entries/info/net/arp (arp -n)
Generic Events turns on debugging for OSPF events.
ISM Events turns on debugging for the interface state machine.
LSA Events turns on debugging for link state advertisements.
NSM Events turns on debugging for the neighbor state machine.
216383-D October 2005