Configuring The Schedules; Creating A Schedule - Honeywell MAXPRO Operator's Manual

C O N F I G U R I N G M A X P R O N V R
3
Figure 3-7
You must add the discovered camera(s) using the Add button to view the model name(s).
After adding the camera(s), you can view the model name(s) from the Camera Type drop
down in the left pane of the Camera page.
To add Third Party PSIA/ONVIF cameras in MAXPRO NVR through Discovery
1.
2.
3.
4.
5.
Note:
C
ONFIGURING THE
A schedule defines the date and times when continuous recording and video analytics
(motion detection) functions are enabled for a camera.
C
REATING A
You can create schedules for the camera to record video at recurring intervals.
To create a schedule
1.
48
Camera Type field displaying "ONVIF DEVICE" for a ONVIF camera
After the discovery, the check boxes corresponding to all the cameras are selected by
default. To add the third party PSIA/ONVIF cameras, first clear the check boxes
corresponding to all other cameras other than PSIA and ONVIF cameras.
Select a third party PSIA/ONVIF camera that you want to add, and click
Advanced Discovery Settings pane.
Type the User Name and Password of the third party PSIA/ONVIF camera as shown in
the following figure.
Click Apply.
Click Add to add the camera.
After adding a third party PSIA/ONVIF camera, you can manually add a new third
party PSIA/ONVIF camera, using the New button located at the bottom of the
Camera page.
S
CHEDULES
S
CHEDULE
Click the Configurator tab. The System page displays by default.
to open the
MAXPRO NVR Operator's Guide