C O N F I G U R I N G M A X P R O N V R
3
Figure 3-2
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
54
User page
Click Add. A new row is created with a default set of values for the user.
Under the User Name column, the default user name is displayed. You can type a new
user name as applicable.
Under the User Description column, type a description for the user.
Under the Role column, select the role you want to assign to the user from the drop-down
list.
Under the Password column, type the user's password.
Under the IsWindowsUser column, select the check box if the user is a Window's user.
Under the Email Address column, type the user's email address.
Click the Camera Association tab to associate cameras to the user.
•
To associate one camera at a time, under the Available List, select a camera and
then click >. The selected camera appears under the Associated List.
•
Click >> to associate all cameras to the Associated List.
•
To remove an associated camera, under the Associated List, select a camera and
then click <. The selected camera appears under the Available List.
•
Click << to disassociate all the cameras to the Available List.
Click the Recorder Event Association tab to associate recorder events to the user.
•
To associate one particular event, under the Available List, select the check box
corresponding to the event and then click >. The select recorder event appears
under the Associated List.
•
Click >> to associate all events to the Associated List.
•
To remove an event, under the Associated List, select a check box corresponding to
the event and then click <. The selected event appears under the Available List.
•
Click << to disassociate all the events to the Available List.
Click the Input Event Association tab to associate input events to the user.
•
To associate one particular input event, under the Available List, select the check
box corresponding to the input event and then click >. The selected input event
appears under the Associated List.
•
Click >> to associate all the input events to the Associated List.
•
To remove an input event, under the Associated List, select a check box
corresponding to the input event and then click <. The selected input event appears
under the Available List.
•
Click << to disassociate all the input events to the Available List.
MAXPRO NVR Operator's Guide