Honeywell MAXPRO Operator's Manual page 18

M A X P R O N V R W I Z A R D
Note:
14
Field Description
Auto IP Assigns a valid address to cameras with Automatic Private IP
Assignment Addressing (APIPA).
Note:
want to assign an IP address in your computer network range to
the cameras.
Dynamic IP MAXPRO NVR software automatically synchronizes any change
Synchronization in the camera's IP address.
For example. if a camera is restarted, and a new IP is associated
to the camera, then the MAXPRO NVR software automatically
detects the changed IP address and synchronizes it to the
camera so that live viewing and recording is not disturbed.
Auto Add Any newly connected camera is automatically discovered and
Discovered added to the camera's list.
Camera
DISCOVERY SETTINGS
Custom Camera Specifies the custom credentials (username and password) for
Credentials the cameras .
Camera Type This option is disabled as only Honeywell cameras are
discovered here.
Default Select this option to retain the default username and password
for the camera.
Custom Select this option to change the default username and password
for the camera
Username, The username and password for the camera.
Password
This option is enabled only if you select the Custom option.
Search Cameras The MAXPRO NVR system automatically detects all the cameras
IP Range in this range on the network.
From, To Type the IP range.
• Select the required language from the drop-down list. The supported languages are
French, German, Russian, Italian, Spanish, and English. The default language is English
(US English).
• Select the Launch Wizard on Windows startup check box to launch the wizard
automatically each time you start Windows.
Click RESET to restore the default settings for each of fields listed in the above
table.
Use this option only if you do not have a DHCP server and
MAXPRO NVR Operator's Guide