Honeywell MAXPRO Operator's Manual page 62

M O N I T O R I N G A S I T E
4
Salvo Layouts and Panels
SURROUNDING CAMERAS
The Surrounding Cameras feature allows you to associate a group of cameras to each
camera. This feature is particularly useful when you want to view video from a group of
cameras at the same time. For example, when you want to view video from cameras located in
the same area. See
SALVO VIEWS
Salvo views enable you to save a salvo layout. The cameras and scan sequences displaying
video in a salvo layout is saved in a salvo view. When you want to view video from the same
cameras and scan sequences again, you can select the corresponding salvo view. See
View.
SWAPPING OF VIDEO DISPLAY BETWEEN PANELS
The video display in a panel can be dragged and dropped on another panel. This feature lets
you swap the video display between panels.
PANEL TOOLBARS
Hovering the mouse over a panel displays a toolbar. The toolbar that appears on top of a
panel enables you to view the name of the video source and close the video display. The
toolbar that appears on the bottom of a panel consists of icons that enable you to zoom in and
zoom out of the video display, flip the video display, view the mirror image of the video display,
cancel the digital PTZ effects on the video display, and perform color correction on the video
display. You can also move the camera to a preset position, save a preset position, and start
recording video. See
58
Surrounding Cameras.
Video Control Options in the Panel Toolbars.
MAXPRO NVR Operator's Guide
Salvo