Setting The Alarm Threshold Value; Configuring The Snapshot Clip Export Settings - Honeywell MAXPRO Operator's Manual

L O G G I N G O N A N D F A M I L I A R I Z A T I O N
2
Setting Preferences
Figure 2-8
3.
4.
S
ETTING THE
When configuring the event settings for a recorder and camera, you can specify a value
known as the Severity Level for each event. When the event occurs, the Severity Level value
is compared with the value in the Alarm Severity Threshold box in the Preferences dialog
box. The alarm is triggered only when the Severity Level value is greater than the Alarm
Severity Threshold value.
For example, the alarm is triggered if the Severity Level for an event is 50 and the Alarm
Severity Threshold value is 40.
To set the Alarm Severity Threshold value
1.
2.
Figure 2-9
3.
4.
C
ONFIGURING THE
You can configure the time interval for the exported snapshot.
To configure the time interval for the exported snapshot
1.
34
Settings for the Alarm Preview Pane
Click Apply.
Click OK to close the dialog box.
A T
LARM
Click the Preferences option in the User menu. The Preferences dialog box displays. By
default, the General Settings tab is selected.
Under Server Level Settings, type the Alarm Severity Threshold.
Setting the Alarm Threshold
Click Apply.
Click OK to close the dialog box.
S
NAPSHOT
Click the Preferences option in the User menu. The Preferences dialog box displays. By
default, the General Settings tab is selected.
V
HRESHOLD ALUE
C E
LIP XPORT
S
ETTINGS
MAXPRO NVR Operator's Guide