Table of Contents
Advertisement
Configuring the Multi-Media LT DVR
Next Steps
Operating the DVR Remotely
Document 800-07766V1 Rev A
02/11
Caution
In Europe, a UPS is required to meet EN50130-4 Euro Norm.
Whether you plan to operate the DVR onsite (using LocalView) or remotely (using View
software through a network connection), you need to set up LocalView.
Note
For remote operations using only dial-up, you do not need to set up
LocalView.
The following chapters in this guide provide detailed procedures and reference materials,
starting with
Chapter 2,
Installation.
If you plan to perform a quick connection after the installation, to connect remotely to Rapid
Eye LT DVRs, you should refer to the
Guide, and the
System Administrator
System Common Operator
Note
After installing the Rapid Eye software, documentation about Rapid Eye
Multi-Media LT (REM) is available at the operator's PC. Click Start
Programs
publication title (choose the document you want to view).
You can also consult the
Rapid Eye™ Multi-Media Digital Video Recorder Remote View
Guide, which offers more procedures and reference material.
Operator
Rapid Eye™ LT DVR Installation Guide
Rapid Eye™ Multi-Media Digital Video Recorder
Rapid Eye™ Multi-Media Digital Video Recorder
Guide, for the necessary procedures.
Rapid Eye Multi-Media LT x.x
All
Documentation
REM
21
Advertisement
Table of Contents
