Honeywell MAXPRO Operator's Manual page 45

Figure 3-3
Caution:
5.
6.
MAXPRO NVR Operator's Guide
You can also view a graphical illustration of the drive statistics with legends for each of the
above fields.
Graphical Illustration
• In the Recording recycle at box, type a value. The Recording recycle refers to a
state when the oldest video recordings are automatically deleted, if there is no
disk space on the drives for new video recordings.
• In the Low disk alarm at box, type a value. The Low disk alarm refers to a state
when the space on the drives for video storage is nearing the maximum size of
the drives.
The Low disk alarm at value must be always greater than the Recording
recycle at value.
Note:
Click Refresh to refresh the information under Disk Space at any point of time.
Click Add Drive to add a fixed drive or a network drive.
• The fixed drive that you are adding must be available on the MAXPRO NVR system,
else an "Invalid Drive" text displays in the Total Space (GB) column.
• Add a network drive in the following format: \\<IP address >\<folder name> for
example, \\192.168.1.12\Recorded Clips.
Note:
The Network drive added must be valid with proper folder permissions set for the
installed default user, else an "Invalid Drive" text displays in the Total Space
(GB) column.
Click Save to save the information or click Reset to clear the information entered.
C O N F I G U R I N G M A X P R O N V R
41