Honeywell MAXPRO Operator's Manual page 53

2.
Figure 3-8
3.
4.
5.
MAXPRO NVR Operator's Guide
Click the Schedule tab to navigate to the Schedule page. By default MAXPRO NVR
supports the following 4 default schedules: 24 x 7, Weekday, DayTime, and NightTime.
Schedule page
Note:
You cannot modify/delete any of the default schedules.
Click Add to create a new schedule.
Configure the schedule details as listed in the following table.
Type Setting
Schedule The schedule name appears by default. You can type a new
Name schedule name as applicable.
Schedule Type the schedule description.
Description
Advanced schedule settings
Select row Select the day of the week.
From Select the from date.
To Select the to date.
Select Click Select. The schedule details entered appear under Scheduler
Settings.
Clear Click Clear to clear the information entered.
Click Save or click Reset to undo the changes.
C O N F I G U R I N G M A X P R O N V R
49