7. Press a 26mm x 76mm Inner Cap (74) into the
top of the Left Upright (20).
Attach the Left Upright (20) to the Rear Base (2)
with the four M10 x 67mm Bolts (87) and four
M10 Nylon Locknuts (93). Do not tighten the
Locknuts yet.
8. Press two Weight Guide Bushings (57) into the
Rear Base (2).
Set the two Weight Guides (27) in the indicated
holes in the Rear Base (2).
Slide two M8 x 90mm Bolts (90) through two M8
Large Washers (53), two 15mm x 30mm Spacers
(23), the Rear Base (2), the Weight Guides (27),
and two more 15mm x 30mm Spacers.
7
8
27
23
57
23
8
74
20
93
93
2
87 87
90
53
23
2