NordicTrack NTSY59210 User Manual page 14

27. Wrap the High Cable (100) around a 115mm
Pulley (54). Attach the Pulley and a Cable Trap
(52) to the top set of holes in the other pair of
Pulley Plates (35) with an M10 x 50mm Bolt (77)
and an M10 Nylon Locknut (93). Be sure the
Cable Trap is turned to hold the Cable in the
groove of the Pulley.
28. Route the High Cable (100) through the Right
Upright (17) and around a 115mm Pulley (54).
Attach the Pulley inside the Right Upright with an
M10 x 65mm Bolt (88), two M10 Washers (89),
two 15mm x 12mm Spacers (62), and an M10
Nylon Locknut (93).
29. Wrap the High Cable (100) around a 115mm
Pulley (54). Attach the Pulley to the Double "U"-
bracket (36) with an M10 x 45mm Bolt (86) and
an M10 Nylon Locknut (93).
30. Wrap the High Cable (100) around a 115mm
Pulley (54). Attach the Pulley to the bracket on
the Press Top Frame (13) with an M10 x 45mm
Bolt (86) and an M10 Nylon Locknut (93).
27
28
93
29
54
93
30
93
14
93
100
54
35
52
77
35
89
62
89
62
88
100
54
17
100
86
36
13
Bracket
86
54
100