Changing User Properties - Kyocera FS-3040MFP Operation Manual

Changing User Properties

User information can be changed. It can be changed only by a user with administrator privileges.
Use the procedure below to change the user properties.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Sys. Menu/Count.: a b
4
*********************
5
6
Login User Name
Login Password:
User/Job Account: a b
1
*********************
2
3
User Login Set.: a b
1
2
*********************
3
Local User List: a b
l DeviceAdmin
*********************
l Admin
l User1
Downloaded From ManualsPrinter.com Manuals
User/Job Account
User Property
Common Settings
[ Exit
L b
*******************
[ Login
User Login Set.
Job Account. Set.
Unknown ID Job
[ Exit
User Login
Local User List
Group Auth.
[ Exit
[ Menu
1
Press the System Menu/Counter key on the main unit
operation panel.
2
In the Sys. Menu/Count. menu, press the
select [User/Job Account], and then press the OK key.
]
3
If user login administration is disabled, the user
authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you
need to log in with administrator privileges. Refer to
Adding a User on page 11-6 for the default login user
name and password.
]
4
In the User/Job Account menu, press the
select [User Login Set.].
]
5
Press the OK key. The User Login Set. menu appears.
]
6
Press the or
7
Press the OK key. Local User List appears.
]
11-9
Management
or
or
key to select [Local User List].
key to
11
key to