Kyocera FS-3040MFP Operation Manual page 270

CR Action
Set the character return action when the machine receives the character return code (character code 0DH). The table
below shows the available settings. The default setting is CR Only.
Use the procedure below to specify a CR action.
Downloaded From ManualsPrinter.com Manuals
Sys. Menu/Count.:a b
5
Common Settings
6
Copy
7
*********************
Printer
[ Exit
Printer:
1
*********************
Emulation Set.
2
EcoPrint
3
Override A4/LTR
[ Exit
LF Action:
1 *LF Only
*********************
2
LF and CR
3
Ignore LF
Item
CR Only
LF and CR
Ignore CR
Sys. Menu/Count.:a b
5
Common Settings
6
Copy
7
*********************
Printer
[ Exit
1
In the Sys. Menu/Count. menu, press the
select [Printer].
]
2
Press the OK key. The Printer menu appears.
a b
]
3
Press the
4
Press the OK key. LF Action appears.
M b
5
Press the
[Ignore LF].
6
Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Description
Only character return performed.
Character return and line feed performed.
No character return performed.
1
In the Sys. Menu/Count. menu, press the
select [Printer].
]
8-82
Default Setting (System Menu)
or key to select [LF Action].
or key to select [LF Only], [LF and CR] or
or key to
or key to