Kyocera FS-3040MFP Operation Manual page 318

2 *On
WSD Scan Setup
Select whether or not to use WSD Scan. The default setting is On.
Use the procedure below to setup the WSD-SCAN setting. The machine must be restarted after the setting is
changed.
Downloaded From ManualsPrinter.com Manuals
Network Setting: a b
1 TCP/IP Settings
*********************
2
NetWare
3 AppleTalk
[ Exit
AppleTalk
1
Off
*********************
Sys. Menu/Count.:a b
1
Report
2 Counter
3 System
*********************
[ Exit
Login User Name:
*******************
Login Password:
[ Login
System:
1 Network Setting
*********************
2
I/F Block Set.
3 Security Level
[ Exit
3
Press the
4
Press the OK key. The Network Setting menu appears.
]
5
Press the
6
Press the OK key. AppleTalk appears.
a b
7
Press the
press the OK key.
Completed. is displayed and the screen returns to the
Network Setting menu.
1
In the Sys. Menu/Count. menu, press the
select [System], and press the OK key.
]
A login screen will appear. Then, enter the user ID and
L b
password with administrator privileges to log in, and
press [Login] (the Right Select key).
]
2
The System menu appears.
a b
]
3
Press the
8-130
Default Setting (System Menu)
or key to select [Network Setting].
or key to select [AppleTalk].
or key to select [On] or [Off] and then
or key to select [Network Setting].
or key to