Kyocera FS-3040MFP Operation Manual page 316

NetWare Setup
Select the NetWare network connection. After that, select frame types for NetWare network from Auto,
Ethernet-II, 802.3, 802.2, or SNAP. The default settings is "Off".
Use the procedure below to setup the NetWare setting.
Downloaded From ManualsPrinter.com Manuals
IPv6 Setting:
1 *Off
*********************
2
On
[ Exit
Sys. Menu/Count.:a b
1 Report
2
Counter
3
********************* System
[ Exit
Login User Name:
*******************
Login Password:
[ Login
System:
1
Network Setting
*********************
2 I/F Block Set.
3 Security Level
[ Exit
Network Setting: a b
1
TCP/IP Settings
*********************
2 NetWare
3 AppleTalk
[ Exit
8
Press the OK key. IPv6 Setting appears.
a b
]
9
Press the
10
Press the OK key. Completed. is displayed and the
screen returns to the TCP/IP Settings menu.
1
In the Sys. Menu/Count. menu, press the
select [System], and press the OK key.
]
A login screen will appear. Then, enter the user ID and
L b
password with administrator privileges to log in, and
press [Login] (the Right Select key).
]
2
The System menu appears.
a b
]
3
Press the
4
Press the OK key. The Network Setting menu appears.
]
5
Press the
8-128
Default Setting (System Menu)
or key to select [On] or [Off].
or key to select [Network Setting].
or key to select [NetWare].
or key to