Kyocera FS-3040MFP Operation Manual page 62
Hide thumbs
Also See for FS-3040MFP:
- Service manual (273 pages) ,
- User manual (89 pages) ,
- Quick installation manual (32 pages)
Table of Contents
Advertisement
Setting the WIA Driver (Windows Vista™, Windows® Server 2008 and Windows 7)
Register this machine to the WIA Driver.
NOTE:
The following is not necessary to register when using the machine possesses an IP address or host name
that you have specified during installation of WIA Driver.
1
Click Start, Control Panel and then Scanners and Cameras. For Windows 7, in the search box, type scanners
and cameras, and then click Scanners and Cameras.
2
Select the same name as this machine from WIA Drivers, and press Properties.
NOTE:
If Windows Security and User Account Control are displayed, no trouble should be found with operation
after installing the driver and software we have provided. Continue installation.
3
Click the Settings tab and select Image Compression and the Compression Level. If user login administration
is invalid, go to Step 5.
NOTE:
When the machine's IP address is unknown, contact Administrator.
4
Select the checkbox beside Authentication, enter Login User Name (up to 64 characters) and Password (up to
64 characters) and then click OK.
Downloaded From ManualsPrinter.com Manuals
2-26
Preparation before Use
Advertisement
Table of Contents
