Network Setup - Kyocera FS-3040MFP Operation Manual

Network Setup

The following network settings are available.
• LAN Interface Setup ...8-117
• TCP/IP (IPv4) Setup ...8-118
• TCP/IP (IPv6) Setup ...8-127
• NetWare Setup ...8-128
• AppleTalk Setup ...8-129
• Protocol Detail ...8-133
LAN Interface Setup
Specify the settings for the LAN interface to be used. The default setting is Auto.
Use the procedure below to select the interface.
Sys. Menu/Count.:a b
1
2
3
*********************
Login User Name:
Login Password:
System:
1
*********************
2
3
Network Setting: a b
1
*********************
2
3
Downloaded From ManualsPrinter.com Manuals
Report
Counter
System
[ Exit
L b
*******************
[ Login
a b
Network Setting
I/F Block Set.
Security Level
[ Exit
TCP/IP Setting
NetWare
AppleTalk
1
In the Sys. Menu/Count. menu, press the
select [System], and press the OK key.
]
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
]
2
The System menu appears.
]
3
Press the or
4
Press the OK key. The Network Setting menu appears.
5
Press the or
8-117
Default Setting (System Menu)
or
key to select [Network Setting].
key to select [LAN Interface].
key to
8