Control Panel - Panasonic NN-CF876S Operating Instructions Manual

Display Window
Step by step instructions scroll for
easy operation
Sensor Reheat/Cook Pad
Auto Cook Pad (page 28)
Popcorn Pad (page 25)
Convection Pad (page 22)
Grill Pad (page 21)
Combination Pad (page 23)
Stop/Reset Pad
Before cooking: One touch clears all
your instructions.
During cooking: One touch temporar-
ily stops the cooking process. Another
touch cancels all your instructions,
and time of day or colon appears in
the Display Window.
Beep Sound:
When a pad is touched correctly, a beep will be heard.
If a pad is touched and no beep is heard, the unit did not or cannot accept the instruction. When operating, the oven will
beep twice between programmed stages. At the end of any complete program, the oven will beep 5 times.
Notes:
1. If there is no operation for 6 minutes after setting cooking program, the oven will automatically cancel the cooking
program. The display will return to clock or colon display.
2. The oven will enter stand-by mode after the last operation has completed. When in stand-by mode, the backlight of the
display will be reduced and the backlight of key will be turned off.
3. When in stand-by mode, it is necessary to open and close the oven door before operating the oven.
4. If no beep sound is heard, check "Beep ON/OFF" function feature (P18, 19).
F0003BH21CP_OI_Eng_00_160121.indd sec14 F0003BH21CP_OI_Eng_00_160121.indd sec14

Control Panel

(page 29)
Slider bar (page 18)
Touch or hold "+"/"-",
swipe the slider bar to select the
cooking options.
Inverter Turbo Defrost Pad
(page 26)
More/Less Pad (page 25)
Quick 30 Pad (page 24)
Micro Power Pad (page 20)
Timer/Clock Pad
(page 17, 37)
Start Pad
After cooking program setting, one
touch allows oven to begin function-
ing.
If door is opened or Stop/Reset Pad
is touched once during oven opera-
tion, Start Pad must be touched again
to restart oven.
14
2016/1/22 9:15:18 2016/1/22 9:15:18