Auto Cook Feature - Panasonic NN-CF876S Operating Instructions Manual

Convection

Table of Contents

This feature allows you to cook most of your favourite foods by setting the weight only. The oven determines the power

setting, then the cooking time automatically. Select the category of food and then just enter the weight. Do not include the

weight of any added water or the container weight.

For best results, some menu need preheat oven before cooking

For Menu 1-7 and 10-11, please operate as

follows:

Example: To cook 300 g (10.5 oz.) of frozen potato

products

Step 1.

• Touch Auto Cook.

Touch once.

Step 2.

• Select the desired auto menu

Swipe

Step 3.

• Touch Auto Cook to verify the

Touch once.

Step 4.

• Select the desired weight using the

Swipe

Step 5.

• Touch Start.

Cooking starts.

NOTES:

1. When you select an automatic program symbols will appear in the display to show the cooking mode that will be used

and the accessories that are needed.

2. Most foods beneﬁ t from a STANDING time after cooking on an auto program, to allow heat to continue

conducting to the centre.

3. If the temperature of the cavity is high, auto cook feature can not be used. Display window will display "HOT". auto cook

feature can not be used until the "HOT" disappears.

4. To allow for some variations that occur in food, check that food is thoroughly cooked and piping hot before serving.

5. For some menus, oven will beep to ask you stir or turn over the food during the cooking.

F0003BH21CP_OI_Eng_00_160121.indd sec28