Routes - Humminbird HELIX 5 SERIES Operation Manual

Routes

Save the Current Route: While you are navigating, the current route can be saved. From the
Navigation X-Press Menu, select Save Current Route, and press the RIGHT Cursor key. Navigation
will continue.
Create a New Route: Open the Waypoint Management dialog box. Select Options > New > New
Route.
• New Route Dialog Box: Use the 4-WAY Cursor Control key to set the available fields (see
Edit your Waypoints, Routes, Tracks, and Groups for details).
• Plan a Route: Select Plan Route, and press the RIGHT Cursor key. The New Route dialog
box closes so that you can select waypoints from the Waypoint Management dialog box.
To add a selected waypoint to the route, press the RIGHT Cursor key. Repeat as needed.
Select Save and press the RIGHT Cursor key.
A
C
Save: Press the EXIT key to choose Save.
A
Press the RIGHT Cursor key to confirm the save.
B
Selected Waypoint: Press the RIGHT Cursor
key to add it to the Route.
Travel a Saved Route: Open the Waypoint Management dialog box. Select a saved route, and
press the RIGHT Cursor key. Select Travel, and press the RIGHT Cursor key. Select Forward to
travel the route in order. Select Reverse to travel the route in reverse order.
Edit the Waypoint Order in a Route: Open the Waypoint Management dialog box. Select a
Route, and press the RIGHT Cursor key to open the Route submenu. Select Open, and then choose
one of the following options:
• Select Reverse, and press the RIGHT Cursor key. This will quickly reverse the order of the
route. Press the EXIT key to select Save. Press the RIGHT Cursor key to confirm your changes.
Introduction to Navigation
Adding Waypoints to a Route
B
64
D
New Route Information: Shows
the Route's name and next steps.
A confirmation displays each time
you add a waypoint to the Route.
C
D