Course Projection Line; Continuous Navigation Mode; Gps Receiver Override - Humminbird HELIX 5 SERIES Operation Manual

Course Projection Line displays an arrow or line, extending from the bow of the boat, that
projects your current course and shows where the boat will go if you continue on your present
course.
You can choose the style of the Course Projection Line as follows:
• Standard = arrow
• Single Vector = line
• COG/SOG = line with tick marks at set intervals from the boat. The tick marks are based
on the speed calculation.
3D View Outline allows you to display or hide an outline on the Chart side of the Chart or Bird's
Eye Combo Views that shows what you're viewing on the Bird's Eye side of the view.
Continuous Navigation Mode allows you to continue to navigate and fish around a particular
waypoint, even if you pass over it multiple times.
GPS Receiver Override allows you to set which GPS receiver to use if you have multiple GPS
receivers plugged into the system. These multiple GPS receivers may be internal or external. If you
select Auto, your unit will select a GPS receiver automatically.
NOTE: If only one GPS receiver is plugged into your system, then Auto will be the only option shown.
Navigation Menu Tab

Course Projection Line

Settings: Hidden, Standard, Single Vector, COG/SOG; Default = Standard
3D View Outline
Settings: Hidden, Visible; Default = Visible

Continuous Navigation Mode

Settings: Off, On; Default = Off

GPS Receiver Override

(Advanced)
Settings: Internal, External, Auto; Default = Auto
124