Humminbird HELIX 5 SERIES Operation Manual page 73

Edit a Waypoint, Route, Track, or Group
1. Open the Waypoint Management dialog box.
2. Open the Submenu: Use the 4-WAY Cursor Control key to select a waypoint, route,
track, or group. Press the RIGHT Cursor key to open the submenu.
3. Select Edit, and press the RIGHT Cursor key.
4. Select a Field: Use the 4-Way Cursor Control key to move from field to field, and press
the UP or DOWN Cursor keys to change the settings.
Name: Press the RIGHT or LEFT Cursor keys to move from space to space, and press
the UP or DOWN Cursor keys to set the letter or number. All upper and lower case
letters are available, as well as digits 0-9 and some punctuation symbols.
Icon Category: Press the UP or DOWN Cursor keys to scroll through the available
categories. Select All to view all available icons. (All, Geometry, Alerts, Supplies,
Navigation, Recreation, Fish, Environment)
Icon: Press the UP or DOWN Cursor keys to scroll through the available icons used
to represent the waypoint in Chart View. The available icons are determined by the
category selected in Icon Category.
Visible: Press the UP or DOWN Cursor keys to set the selected item to visible or
hidden in the Chart View.
Latitude/Longitude: Press the RIGHT or LEFT Cursor keys to move from space to
space, and press the UP or DOWN Cursor keys to set the letter or number.
NOTE: The available settings will depend on the type of item you are editing.
5. Select Save, and press the RIGHT Cursor key to confirm your changes.
67
Introduction to Navigation