Screen Snapshots - Humminbird HELIX 5 SERIES Operation Manual

Screen Snapshots

Screen Snapshots are saved pictures of the view on the screen. The screen snapshot will include
the menus, dialog boxes, warnings, and messages that were active when the screen snapshot
was taken. Saved Screen Snapshots can be viewed from the Snapshot and Recording View or
Chart View.
The Screen Snapshot feature is available when an optional-purchase microSD card is installed and
Screen Snapshot is On (see Setup Menu Tab: Screen Snapshot).
1
Waypoint Saved at Cursor Location
2
Screen Snapshot Confirmation
3
File Name
1 From Snapshot and Recording View,
select Delete Image from the X-Press Menu.
NOTE: Navigation is not affected by the Screen Snapshot feature. Also, if Screen Snapshot is enabled,
but a GPS receiver is not connected, pressing the MARK key will capture the screen image but an error
will display that says a GPS position fix is required to create a waypoint.
1
2 3
1
Make a Screen Snapshot:
1. Activate Screen Snapshot and install a
microSD card.
2. From any view or cursor location you want
to capture, press the MARK key. The screen
will pause while the image is saved.
A waypoint will also be created at the boat or
active cursor location. The screen snapshot
shares the same file name (.PNG).
Delete a Screen Snapshot:
1. From the Snapshot and Recording View,
press the UP or DOWN Cursor keys to scroll
through the saved files and highlight a
snapshot file.
2. Press the Menu key once, and select Delete
Image from the X-Press Menu.
3. Press the RIGHT Cursor keys.
43
Snapshot and Recording View