Honeywell Galaxy 2 Series Installation Manual page 90

56 - Comms (cont'd)
2 = SIA (Security Industries Association)
The SIA format provides a highly detailed protocol that transmits detailed information including zone descrip-
tions to a PC loaded with suitable software or to a SIA compatible receiver. The SIA format is capable of
transmitting over 70 different Galaxy 2 Series events (refer to Appendix A for further details).
On selecting the SIA format, the keypad prompts for the required SIA level to be entered, there are 4 SIA
levels available:
• 0 (default) - Basic event information with 4-digit account number.
• 1 - as level 0 plus 6 digit accounts
• 2 - as level 1 but with event modifiers
• 3 - as level 2 but with text descriptions
1 = Triggers
When the SIA level has been selected press the ent key. The keypad displays the first trigger event and it's
On/Off status (see the following table for the list of available triggers, and Appendix B for the events which are
controlled by each trigger). The triggers control the events, which are transmitted. If the trigger is set to On,
any events logged, which are controlled by the trigger will be transmitted. If the trigger is set to Off, the events
controlled by the trigger will not be transmitted. Step through the trigger events using the A and B keys.
3 = Contact ID
Contact ID format is a protocol which transmits point identification information to an Alarm Receiving Centre
that is capable of receiving the Galaxy 2-44 variant of contact ID.
The menu structure and programming of the options are identical to the SIA format. Refer to 2 = SIA for
programming details.
Galaxy 2 Series Installation Manual
N o r T g i g r e E v e t n
1 P a n c i
2 t n I u r d r e
3 2 4 H o u s r
6 i F e r
8 O m t i
9 a T m p r e
1 0 S t e U / s n t e
Table 24. Trigger Events
82
N o r T g i g r e E v e t n
1 1 R e s t e C / a c n l e
1 3 E e l c t S t a s u
1 4 S s y e t m t S t a s u
1 5 S s y e t m F a u s t l
1 9 R F F a u s t l
2 0 A s s s i a t c n e