Konica Minolta bizhub PRESS 1052 User Manual page 54

4.5 Print Data
[File Check]
[Thumbnail]
[Combination] - [File]
[Combination] - [Image]
[File Delete]
[All Release]
[Release]
[Proof (1st Sheet)]
[Proof]
[Wait]
[Auto]
[Suspended]
[Print]
7
When [Auto] is selected, a screen to specify the number of copies appears. Enter a number with the
keypad, and then press [OK].
% By pressing [Change Output Sheet], you can choose printing pages between all pages and a spec-
ified page or specified pages.
bizhub PRESS 1250/1052
Displays the list of the settings of the selected file.
Displays the thumbnail of the selected file.
Prints selected files at once with their settings and attributes kept.
10 files can be combined at once at the maximum.
Prints selected files at once as one file without keeping their settings
and attributes.
10 files can be combined at once at the maximum.
To add settings, select an output method other than [Auto].
You can add settings in the [Mode Check] screen, or with [Ticket Ed-
it] in the [JOB LIST] screen.
To see the operation flow, refer to page 4-27.
Deletes the selected file.
The file is deleted by pressing [Yes] in the confirmation message
screen.
Clears all the print settings.
Clears the print settings.
Prints the first page only, stops, and then displays the [Mode Check]
screen to check or change the print settings.
If it is unnecessary to change the print settings, press the [Start] but-
ton to restart printing.
To see the operation flow, refer to page 4-27.
When printing multiple copies, prints one copy, stops, and then dis-
plays the [Mode Check] screen to check or change the print settings.
If it is unnecessary to change the print settings, press the [Start] but-
ton to restart printing.
To see the operation flow, refer to page 4-27.
Stops after RECALL and a screen is displayed to confirm settings.
Settings can be changed.
To see the operation flow, refer to page 4-27.
When this button is selected, printing starts without pressing the
[Start] button.
To see the operation flow, refer to page 4-27.
When this button is selected, job moves to [Suspend] in the [Job
List] screen.
To see the operation flow, refer to page 4-27.
Prints the selected file.
4
4-23