Send By An E-Mail; Items To Be Configured - Konica Minolta bizhub PRESS 1052 User Manual

5.2

Send by an E-Mail

5.2 Send by an E-Mail
You can send the data read in from the copier's ADF or the original scanning glass (scanned data) to an E-
Mail address as an attached file.
For how to operate it, refer to page 7-4.
Copier
5.2.1

Items to be configured

In order to send the scanned data by E-mail, the following items need to be configured.
Address (E-mail address)
Select an E-mail address from the registered addresses, or specify an address as you operate scanning. You
can specify multiple E-mail addresses.
For information on how to register an E-mail address, refer to page 6-4.
Title
You can choose an E-mail title from 5 types, or you can input a title as you operate scanning.
On how to input a title, refer to page 7-4.
Text
You can choose a text from 5 types, or you can input a text as you operate scanning.
On how to input a text, refer to page 7-4.
7 CAUTION
- When transmitting a message to the E-mail address, the setting of the Administrator's E-mail address
is required. For details, refer to "Administrator registration" in the "User's Guide (POD Administrator's
Reference)".
Transmission from the copier is up to the SMTP server. If the network or the POP server has any problem,
the mail may not reach a recipient. When sending an important E-mail, make sure if the recipient has received
it.
7 CAUTION
- Depending on settings of the recipient server, the size of an attached file is regulated. For details, con-
tact your administrator.
bizhub PRESS 1250/1052
Original
Scan
SMTP server POP server
Internet
5
5-3