Konica Minolta bizhub PRESS 1052 User Manual page 111

7.2 Transmission to an E-mail Address
5
Press the E-mail address you want to send to.
% The selected destination is displayed in [List] at the left side of the screen.
% You can refine the registered address by the search function. For details, refer to page 3-7.
% You can refine the Register Name by using [A to Z]. For more information on how to use [A to Z],
refer to page 7-2.
% To deselect the address, press the selected address again.
% When entering an address manually, refer to page 7-7.
6
Press [Scan Settings].
Pressing this key displays the Scan Setting screen.
7
Configure the necessary items.
% For more information on the configurations on the Scan Setting screen, refer to page 7-35.
% Press [File Name] if you want to specify the name of the attached file.
8
Set an original, and then press [Start].
The original is scanned, and the scanned data are transmitted to the specified destination.
% The scanned data on E-mail are sent to the SMTP server.
% To return to the screen to specify destinations, press [Address].
% Settings on the scan setting screen and the selection on the destination screen may remain till the
machine is restarted. It is recommended to clear the settings ans the selection after the operation.
To clear the settings, press [Reset] in the scan setting screen. To clear the selection, return to the
destination screen by pressing [Address] and then press [Clear All], or press [Reset] on the control
panel.
bizhub PRESS 1250/1052
7
7-6