7.5
Transmission to the SMB server
7.5
Transmission to the SMB server
When you send a scanned data to SMB server, the procedures will be different depending on whether the
SMB server address is registered in advance or it is entered manually.
d
Reference
Refer to the following pages.
When an SMB server is Already Registered: page 7-20
When an SMB server is Input Manually: page 7-22
When an SMB server is Already Registered
1
Press [SCAN] tab.
2
Press [SMB].
% In the initial settings, [E-mail] is selected. The default Address tab of the SCAN screen can be set at
[Utility/Counter] - [Scan Setting] - [Default Address Setting]. For details, refer to page 9-3.
3
Press the address of the SMB server.
% The selected destination is displayed in [List] at the left side of the screen.
% You can refine the registered address by the search function. For details, refer to page 3-7.
% You can refine the Address by using [A to Z]. For more information on how to use [A to Z], refer to
page 7-2.
% To deselect the address, press the selected address again.
% When entering an address manually, refer to page 7-22.
bizhub PRESS 1250/1052
7
7-20