Replacing The Stand Assembly; Easel Stand; Pedestal Stand; Procedure To Replace Stand Riser To Stand Base - Dell Inspiron 22 3000 Series Service Manual

Replacing the stand assembly

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Easel stand

•

Pedestal stand

Easel stand
1 Insert the tabs on the stand bracket into the slots on the back cover.
2 Align the screw holes on the stand with the screw holes on the back cover.
3 Replace the screws that secure the stand to the back cover.
4 Replace the stand cover.
Pedestal stand
1 Insert the tabs on the stand bracket into the slots on the back cover.
2 Align the screw holes on the stand with the screw holes on the back cover.
3 Replace the screws that secure the stand bracket to the back cover.
4 Replace the stand cover.

Procedure to replace stand riser to stand base

1 Slide the stand base into the slot on the stand riser.
2 Tighten the captive thumbscrew and fold the screw handle on the stand base.
computer. After working inside your computer,
After working inside your
Replacing the stand assembly
computer. For more safety
5
26