WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION:
Hard drives are fragile. Exercise care when handling the hard drive.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Align the screw holes on the hard drive with the screw holes on the hard-drive
bracket.
2
Replace the screws that secure the hard-drive bracket to the hard drive.
3
Connect the hard-drive cable to the hard drive.
4
Align the tabs on the hard-drive assembly with the slots on the display-
assembly base.
5
Slide the securing tabs on the hard-drive assembly into the slots on the
display-assembly base.
6
Replace the screw that secures the hard-drive assembly to the display-
assembly base.
Post-requisites
1
Replace the
back
2
Replace the stand.
Replacing the hard drive
computer. After working inside your computer,
After working inside your
cover.
computer. For more safety
Replacing the hard drive
11
37