Replacing The System-Board Shield; Procedure; Post-Requisites - Dell Inspiron 22 3000 Series Service Manual

Replacing the system-board
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1 Align the slots on the system-board shield with the ports on the system board
and place the system-board shield on the display-assembly base.
2 Align the screw holes on the system-board shield with the screw holes on the
display-assembly base.
3 Replace the screws that secure the system-board shield to the display-
assembly base.
Post-requisites
1 Replace the back
2 Replace the stand.
computer. After working inside your computer,
After working inside your
cover.
computer. For more safety

Replacing the system-board shield

13
shield
40