WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Connect the camera cable to the camera module.
2
Press the camera frame down into the slot on the display-assembly base until
it snaps into place.
3
Route the camera cable and antenna cable through the routing guides on the
display-assembly base.
Post-requisites
1
Replace the
back
2
Replace the stand.
Replacing the camera
computer. After working inside your computer,
After working inside your
cover.
computer. For more safety
Replacing the camera
23
59