Removing The Control-Buttons Board; Prerequisites; Procedure - Dell Inspiron 22 3000 Series Service Manual

Removing the control-buttons
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1 Remove the stand.
2 Remove the back
Procedure
1 Using a plastic scribe, push the securing clips on the control-buttons board
slot.
NOTE: Note the orientation of the control-buttons board so that you can
replace it correctly.
2 Press the securing clips and lift the control-buttons board off the display-
assembly base.
3 Open the latch and disconnect the control-buttons board cable from the
control-buttons board.
computer. After working inside your computer,
After working inside your
cover.

Removing the control-buttons board

18
board
computer. For more safety
50