Removing the system board
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
NOTE:
Your computer's Service Tag is stored in the system board. You must
enter the Service Tag in the BIOS setup program after you replace the system
board.
NOTE:
Replacing the system board removes any changes you have made to the
BIOS using the BIOS setup program. You must make the appropriate changes
again after you replace the system board.
NOTE:
Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect the cables correctly after
you replace the system board.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the stand.
2
Remove the
back
3
Remove the
system-board
4
Remove the
heat
5
Remove the
memory
6
Remove the
wireless
computer. After working inside your computer,
After working inside your
cover.
shield.
sink.
module.
card.
computer. For more safety
Removing the system board
32
72