WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Slide the fan under the heat sink and place it on the display-assembly base.
2
Align the screw holes on the fan with the screw holes on the display-assembly
base.
3
Replace the screws that secure the fan to the display-assembly base.
4
Connect the fan cable to the system board.
Post-requisites
1
Replace the
system-board
2
Replace the
back
3
Replace the stand.
Replacing the fan
computer. After working inside your computer,
After working inside your
shield.
cover.
27
computer. For more safety
Replacing the fan
65