Replacing The Display Cable; Procedure; Post-Requisites - Dell Inspiron 22 3000 Series Service Manual

Replacing the display cable

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1 Connect the display cable to the display assembly and close the latch to
secure the cable.
2 Adhere the tape that secures the display cable to the display assembly.
Post-requisites
1 Replace the display
2 Replace the system
3 Replace the speakers.
4 Replace the heat
5 Replace the fan.
6 Replace the microphone.
7 Replace the control-buttons
8 Replace the wireless
9 Replace the memory
10 Replace the system-board
11 Follow the procedure in step 3 to step 6 in
computer. After working inside your computer,
After working inside your
assembly.
board.
sink.
board.
card.
module.
shield.
computer. For more safety
"Replacing the hard
Replacing the display cable
37
drive".
86