Cleaning The Dadf Feed Rollers; Moving The Printer - Dell H625cdw User Manual

1 Duplex Sensor Glass
2 White Strip
6 Gently close the DADF chute cover.
7 Close the document cover.

Cleaning the DADF Feed Rollers

Keeping the DADF feed rollers clean helps ensure the best possible copies. It is
recommended to clean the DADF feed rollers at regular intervals.
1 Open the DADF cover.
2 Wipe the DADF feed rollers with a dry soft lint-free cloth or paper towel until they are
clean.
If the DADF feed rollers get stained with ink, documents that go through the DADF
can also become stained. In this case, slightly dampen a soft lint-free cloth or paper
towel with a neutral detergent or water, and then remove the ink stains from the
DADF feed rollers until they are clean and dry.

Moving the Printer

This section describes how to move the printer.
WARNING:
• Before performing any of the following procedures, read and follow the safety instructions in
the Important Information.
• If the optional 550-sheet feeder (Tray2) has been installed, uninstall the optional 550-sheet
feeder before moving the printer. If the optional 550-sheet feeder is not fixed securely to the
printer, it may fall to the ground and cause injuries. See "Removing the Optional 550-Sheet
Feeder."
1 Turn off the printer, and then disconnect the power cord, interface cable, and any
other cables.
Maintaining Your Printer
349
|