Table of Contents
Advertisement
Status-Code
033-776
033-788
034-515
034-791
035-701
035-708
035-717
035-718
035-720
035-781
042-700
077-301
077-302
091-911
091-914
091-917
091-918
091-919
What you can do
The size of the fax document data is too large and may have exceeded the
space available in memory. Lower the scan resolution rate and then try
scanning again. See "Resolution."
Tap Close, or wait for 60 seconds for the printer to recover. Try the
following:
• Remove the received fax, or wait for a while until sending a fax is
completed.
• Print the fax job stored using the Secure Receive feature.
See "Receiving Faxes in the Secure Receiving Mode."
Tap Close, or wait for 60 seconds for the printer to recover. Try the
following:
• Try the same operation.
• Check the printer or remote machine if the memory is full.
Tap Close, or wait for 60 seconds for the printer to recover. Check if the
telephone cable is connected properly. If the line connection is correct,
check the following:
• If Tone/Pulse setting is correct.
See "Tone / Pulse."
If Tone/Pulse setting is correct, check the following:
• If the remote machine can receive a fax.
Tap Close, or wait for 60 seconds for the printer to recover. Check the
following:
• Status of the remote machine
• Tone/Pulse setting
See "Tone / Pulse."
Tap Close, or wait for 60 seconds for the printer to recover. Try the
following:
• Try the same operation.
• Reduce the modem speed.
See "Modem Speed."
Tap Close, or wait for 60 seconds for the printer to recover. Reduce the
modem speed. See "Modem Speed."
Tap Close, or wait for 60 seconds for the printer to recover. Check the
status of the remote machine.
Tap Close, or wait for 60 seconds for the printer to recover. Check the
features of the remote machine.
Tap Close, or wait for 60 seconds for the printer to recover. Check if the
remote machine is busy.
Wait for a while until the printer cools down. Contact customer support if
this failure is repeated.
Close the right side cover.
Close the rear cover.
Remove the used waste toner box, and then install a new toner box. See
"Replacing the Waste Toner Box."
Reinsert the drum cartridge of the specified color. If the message remains,
replace the cartridge. See "Replacing the Drum Cartridges."
Understanding Printer Messages
319
|
Advertisement
Table of Contents
