Table of Contents
Advertisement
Fax Defaults
Resolution
2 Sided Scanning
Binding of
Original
Darken/Lighten
Delayed Send
Fax Settings
Configures the fax settings.
NOTE:
• You cannot set up the items on the Fax Settings page unless you set up the country code under
Country.
• Duplex print may not be done depending on the size of the received faxes or settings of the trays,
etc.
Fax Line Settings Fax Number
Country
Fax Header Name
Line Type
Line Monitor
DRPD Pattern
Standard
Suitable for documents with normal sized
characters.
Fine
Suitable for documents containing small
characters or thin lines or documents printed
using a dot-matrix printer.
Super Fine
Suitable for documents containing extremely
fine detail. The super fine mode is enabled only
if the remote machine also supports the Super
Fine resolution.
Photo
Suitable for documents containing
photographic images.
Sets whether to scan both sides of a document.
Sets the binding position for the two-sided
scanning.
Sets the default density to fax your documents
lighter or darker.
Sets the fax transmission start time when
sending a fax at a specified time.
Allows you to enter the fax number of the
printer to be printed on the header of faxes.
Sets the country where the printer is used.
Allows you to enter a name to be printed on the
header of faxes.
Sets the default line type; Public Switched
Telephone Network (PSTN) or Private Branch
Exchange (PBX).
Sets the volume of the line monitor, which
audibly monitors a transmission through the
internal speaker until a connection is made.
Sets the Distinctive Ring Pattern Detection
(DRPD) setting from Pattern1 to Pattern7.
DRPD is a service provided by some telephone
companies.
Dell™ Printer Configuration Web Tool
151
|
Advertisement
Table of Contents
