Table of Contents
Advertisement
The following shows the Tray1 screen as an example.
NOTE:
• Set the same paper size and type as the actual paper being loaded. An error may occur if the
paper size or type setting is different from the loaded paper.
8 Select
or
paper size.
9 Tap Type.
10 Select
or
paper type.
11 Tap OK.
Loading Envelopes in the Tray1
NOTE:
• Use only recommended envelopes. See "Recommended Envelopes."
The following guidelines describe how to load envelopes.
• Use only freshly unpackaged and undamaged envelopes.
If you do not load envelopes in the tray right after they have been removed from the
package, they may bulge. To avoid jams, press firmly across the whole envelopes to
flatten them as shown in the illustration before loading the envelopes in the tray.
• Use only same size envelopes for a single print job.
• The maximum height (quantity) of envelopes that can be loaded in the tray is
approximately 27.5 mm (1.08 inch) (20 envelopes).
198
|
Loading Print Media
until the desired paper size appears, and then select the desired
until the desired paper type appears, and then select the desired
Feed direction
Advertisement
Table of Contents
