Toshiba e-studio191f Service Manual page 216

No. Parameter
012 COMM.
JOURNAL
013 AUTO JRNL
PRINT
014 FILE ACCEPT
REP.
017 RECEIVE MODE 1
022 SUBSTITUTE
RCV
023 REC. PAPER
SIZE
024 PRINT
REDUCTION
025 REDUCTION
RATIO
026 POLLING
PASSWORD
027 POLLED FILE
SAVE
028 STAMP AT MEM.
XMT
031 INC. FILE SAVE
034 ENERGY SAVER
MODE
Setting
Setting
Number
1 Off
2 Always
*3 Inc. Only
1 Invalid
*2 Valid
*1 Invalid
2 Valid
Manual
*2 Auto
1 Invalid
*2 Valid
(----)
1 Fixed
*2 Auto
70 70%
---- ----
*100 100%
(----)
*1 Invalid
2 Valid
1 Invalid
*2 Valid
*1 Invalid
2 Valid
1 Invalid
2 Power
Saver
*3 Sleep
4 Shutdown
Selecting the home position of printout mode for COMM.
Journal Off / Always / Inc. only.
Off:
Does not print
Always:
Always prints
Inc. Only:
Prints only when communication has failed.
Selecting whether the machine prints the journal
automatically after every 200 transactions.
Selecting whether the machine prints the file acceptance
journal.
If you set this parameter to "2:Valid", a journal will be
printed out after a new job is stored in the memory.
Setting the reception mode to automatic or manual.
Selecting whether the machine receives to memory when
the recording paper runs out, toner runs out or the
recording paper is jammed.
Selecting the Paper Tray and paper size.
Selecting print reduction mode.
Fixed:
Reduce received document according to setting of
Parameter No.25.
Auto:
Reduce received document according to the length of
received documents.
Selecting the fixed print reduction ratio from 70% to
100%.
This parameter functions only when the fixed print
reduction is selected on Fax Parameter No.24 (PRINT
REDUCTION).
Setting 4 digits password for secured polling.
Selecting whether the machine retains the polled
document in memory even after the document is polled
once.
Selecting whether the machine stamps the original
documents when storing the documents into memory.
(depending on the Stamp setting on the Control Panel. If
the setting is "1:Invalid", the machine will not stamp even
if the Stamp LED light is ON)
Selecting whether the machine retains the document in
memory if the document is not successfully transmitted.
Select Energy Saver mode and time.
1:Invalid / 2:Power Saver / 3:Sleep / 4:Shutdown Mode
timer:1-240 min.
216
Comments
DP-1910F