Toshiba e-studio191f Service Manual page 169

No. Parameter
122 LDAP
123 ONE RING
SOUND
(USA and
Canada Only)
124 ~ Not Used
199
200 ~ -
299
Note 1: Continuous Polling (Station Mode)
This feature allows you to Store or Add documents into a Polled file in memory.
To enable the Continuous Polling feature set the Function Parameter No. 003 to "2:STN"
(Station).
Depending on the setting of the User Parameter (Facsimile) "No. 119: QWERTY KEYBOARD",
one of the following operations is available:.
1. One-Touch
The upper "40" (40↑) Key is reserved for "Store 4 Polling" function, and cannot be changed.
To prepare document(s) to be polled, simply place the document(s) on the ADF, then press the
"-" (40) Key on the Keyboard (40↑ = LOWER Indicator turned OFF) to Store or Add document(s)
into a Polled file.
2.Quick Name Search
Press "S" (13) Key to search the "Store 4 Polling" name instead.
To prepare document(s) to be polled, simply place the document(s) on the ADF and press the
"S" (13) Key to search for "Store 4 Polling", then press the "Start" Key to Store or Add
document(s) into a Polled file.
(Note: If a regular polled file is stored in memory, the Program Key for Continuous Polling will
not be accepted.)
Note 2: Function Parameter No. 070 (Line Error)-Transmit condition of RTP/PIP or RTN/PIN
Signal
MCF/PIP
RTP/PIP
RTN/PIN
Note 3: Function Parameter No. 071 (Total Error)-Transmit condition of RTP/PIP or RTN/PIN
Note 4: The default setting of parameters depends on the country's specifications or regulations. Print the
Function Parameter List to confirm the default settings.
Note 5: 200 Series Function Parameters Only appear when the G3 Communications Port Kit is installed
and follow the same numbering order.
Function Parameter Table
Selections
1 = Off
2 = On
1 = Off
2 = On
1:128 2:256
0-31 0-63
32-63 64-127
64-127 128-255
Signal
1:5%
MCF/PIP 0-2
RTP/PIP 3-4
RTN/PIN 5-
Selects whether to use the LDAP Server. Special
characters used in the LDAP, may not be recognized
and display incorrectly.
When Function Parameter No. 45 "Ring Detect
Count" is set to 1 Ring, and this parameter is enabled
(On), the machine will only ring once out loud,
answering on the second ring count.
See Note 5
Setting
3:512 4:1024
0-127 0-255
128-255 256-511
256-511 512-1023
Setting
2:10% 3:15%
0-4 0-7
5-9 8-14
10- 15-
169
Function
5:2048 6:Off
0-511 Always
512-1023 -
1024-2047 -
4:20%
0-9
10-19
20-
DP-1910F