Toshiba e-studio191f Service Manual page 34

[6. ADF Drive Assembly]
(1) Remove the Rear Cover (604).
(Refer to 2.3.1. [1.Rear Cover])
(2) Remove the Exit Cover (602).
(Refer to 2.3.1. [2.Exit Cover])
(3) Remove the Control Panel Unit.
(Refer to 2.3.1. [3.Control Panel Unit])
(4) Remove the Top Cover (601).
(Refer to 2.3.1. [4.Top Cover])
(5) Remove the Front Cover Assembly.
(Refer to 2.3.1. [5.Front Cover Assembly])
(6) Loosen 6 Screws.
(7) Remove the SC Cover (714).
(8) Release 2 Harnesses from 2 Clamps and 1 Edge
Saddle.
(9) Disconnect 2 Harnesses on the SC PC Board
(CN519, CN520).
Caution:
When reconnecting the Harnesses, insert the Power-2
Harness into the Edge Saddle as illustrated, to comply
with EMI regulations.
(10) Remove 6 Screws.
(11) Remove the MJR PC Board Assembly.
34
DP-1910F