Toshiba e-studio191f Service Manual page 160

5.1.8. F9 Mode: Unit Maintenance
Set the machine to Service Mode, and press the "9" key.
↓
Press the "Start" key to enter the F9 Service Mode.
↓
Enter the desired code number, or press the "
If you wish to select another code number, press the "
↓
Press the "Set" key.
↓
Enter the desired function code number and press the "Set" key.
When the "Clear" key is pressed, the selected code input will not be accepted.
↓
Press the "Stop" key.
↓
Press the "Function" and the "Clear" keys sequentially to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
Service
Mode
F9 UNIT
MAINTENANCE
", "
F9 Mode
Item
00 FAX FUNC.PARA
01 SVC. ALERT TEL #
02 FIRMWARE 00 SC
VERSION
01 SC BOOT
02 PNL
03 SCANNER
04 PRINTER
05 FAX MODEM
06 G3B BOARD
03 PRINT 00 F5/F6
DEVICE PARAMETERS
INFO.
01 MACHINE
INFO.
02 COUNTER
INFO.
03 SYSTEM
ADDR. INFO.
04 RAM ADDR.
INFO.
04 RAM EDIT 1 RELATIVE
MODE ADRS MODE
2 ABSOLUTE
ADRS MODE
" keys.
", " " keys.
Displays the contact number when a
machine malfunction occurs.
Displays the firmware version for SC.
Displays the firmware version for SC
Boot.
Displays the firmware version for
PNL.
Displays the firmware version for
Scanner.
Displays the firmware version for
Printer or engine.
Displays the firmware version for
FAX.
Displays the firmware version for
G3B.
Prints the memory contents of the F5
and F6 modes.
Prints the machine setup information
list.
Prints the Counter information list.
Prints the system memory setting.
Prints the RAM data dump list.
Setting of Relative address.
Setting of Real address.
160
DP-1910F
Remarks